2303-PJ电池模拟直流电源

在实际条件下测试电池供电的便携式设备，需要一个直流电源可以在各种不同状况下模拟电池性能。 2300 系列电池模拟电源可模拟电池的输出电阻和输出电压响应。 这些电源的双通道版本提供一条通道充当电池并接收电流，用于模拟放电的可充电电池；另一条通道提供电压用于测试设备的充电控制电路。

The characteristics of

advantage

The ultra-fast response to the transient load current provides exactly the same output characteristics as the actual battery.

Variable output resistor

Allows to simulate the internal resistance of the battery.

Pulse peak, mean and baseline load current measurements support the measurement of load current for power verification or analysis.

The 100nA dc current sensitivity provides the required sensitivity to monitor low sleeping mode currents in battery-powered products.

The current level measurement function supports the measurement of load current at various operating conditions.

A rechargeable battery that receives up to 3A as an electronic load, allowing these power supplies to simulate discharge, for testing the performance of a battery charger or battery charger control circuit.

Turn on the sensor wire to detect if there is a break in the remote sensor wire or if there is an open connection between the remote sensor wire and the test fixture.

The built-in digital voltmeter allows the measurement of -- 5V to +30V dc signals at any point in the test system with the same rated accuracy as the power voltage read back.